Camplux Pro 6L Outdoor Portable Tankless Propane Water Heater with 1.2 GPM Water Pump

The 1.58 GPM 41,000 BTU camping water heater with a 1.2 GPM water pump provides instant hot water on the go. It only takes a few minutes to set up - simply connect the inlet and outlet pipes, gas regulator, insert 2 D-cell batteries, and turn on the pump. The water pump is 12V DC powered, and extension hoses and fittings come included for easy connection.

This model is power-efficient and energy-saving, with an 11.5% energy-saving technology that delivers endless hot water at a maximum output of 41,000 BTU/hour. It allows for approximately 45 10-minute showers from a 20 lb gas cylinder, though usage conditions may vary.

Safety is ensured with CSA certification and multiple protection functions, including flameout, anti-freeze, and overheating safeguards. The drain plug discharges residual water to prevent freezing, and the gas supply automatically shuts off when the water temperature exceeds 167°F.

What's included: the 1.58 GPM water heater, 1.2 GPM water pump, two 6.6 ft extension water hoses, a 22 ft cigarette lighter power cable, a 3.28 ft alligator clip cable, a 5 ft pre-installed gas regulator, a 5 ft on/off shower kit, hardware packs, and a user manual. The user will need to provide a 20 lb gas cylinder and a 12V DC power source.

For high elevation use above 2,000 feet, the water heater's efficiency may decrease by 10% for every 1,000 feet in elevation. To power the water pump, connect the alligator clip cable to the power supply terminals or the cigarette lighter cable directly to the car's power.

If the shower is leaking on first use, check the gasket connection with the shower head before use. The outgoing water temperature may vary from the inlet temperature and gas flow, causing a slight delay in temperature change. Adjusting the settings patiently should resolve this.

Compared to similar products, this 1.58 GPM water heater offers a competitive water flow range of 1.7-4.22 GPM and a temperature rise range of 50-140°F, with a maximum power output of 110,000 BTU/hour and a water pressure range of 4.0-110.0 PSI.

product information: